Éditeur(s) : Edinburgh : Adam and Charles Black
Siècle(s) traité(s) : 19
Provenance : Université Caen Normandie. Service commun de la documentation
Permalien : http://www.manioc.org/patrimon/CAE19033_1
CAE19033_1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Imaging deep active volcanic areas remains a challenge in our understanding of their activity and evolution, especially in subduction zones. Study of magnetic anomalies is appropriate to access such dynamics in depth. The magnetic anomaly pattern of the Lesser Antilles Arc (LAA) subduction is studied through Curie Point Depth (CPD), interpreted as the depth of the 580 °C isotherm, and developed to better assess the deep thermal structure of the arc. The depth of the estimated CPD exhibits a complex topography. Keeping in mind the overall uncertainty associated with this method, a main doming is evidenced below the Guadeloupe archipelago. Its apex is shifted towards the ancient arc, suggesting a very hot state of the fore-arc/arc domain. To better understand the LAA thermal state, we perform 2D thermo-mechanical simulations of the subduction zone. Recalling that magnetite is a serpentinization by-product, we simulate water transfer triggered by slab dehydration to test the assumption of fore-arc serpentinization suggested by the positive magnetic anomaly in the vicinity of the Guadeloupe archipelago. In this area, the subduction-induced arc lithosphere hydration and related weakening trigger a fast heating of the upper plate by basal convective removal. This process of fast arc lithosphere thinning may apply where simultaneously the volcanic arc is split in two and normal convergence is high enough. As serpentinization strongly decreases P-wave velocity, we propose a new interpretation of a published seismic profile below Guadeloupe. The seismic layer previously interpreted as the arc lower crust may rather be a layer of serpentinized mantle, as supported by spatial correlations between gravimetric and magnetic anomalies. Consequently, at the scale of Guadeloupe Island, the fore-arc Moho would be shallower than initially assumed, with a dome shape more consistent with both the extensive deformation active since the Oligocene in the inner fore-arc and the CPD doming.
ISSN: 0040-1951

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01505300
https://hal-insu.archives-ouvertes.fr/insu-01505300
https://hal-insu.archives-ouvertes.fr/insu-01505300/document
https://hal-insu.archives-ouvertes.fr/insu-01505300/file/Gailler-2017.pdf
DOI : 10.1016/j.tecto.2017.03.014

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Two-dimensional simulations using a thermomechanical model based on a finite-difference method on a staggered grid and a marker in cell method are performed to study the plume-lithosphere interaction beneath moving plates. The plate and the convective mantle are modelled as a homogeneous peridotite with a Newtonian temperature- and pressure-dependent viscosity. A constant velocity, ranging from 5 to 12.5 cm yr−1, is imposed at the top of the plate. Plumes are generated by imposing a thermal anomaly of 150 to 350 K on a 50 km wide domain at the base of the model (700 km depth); the plate atop this thermal anomaly is 40 Myr old. We analyse (1) the kinematics of the plume as it impacts the moving plate, (2) the dynamics of time-dependent small-scale convection (SSC) instabilities developing in the low-viscosity layer formed by spreading of hot plume material at the base of the lithosphere and (3) the resulting thermal rejuvenation of the lithosphere. The spreading of the plume material at the base of the lithosphere, characterized by the ratio between the maximum down- and upstream horizontal (dimensionless) velocities in the plume-fed sublithospheric layer, Peup/Pedown depends on the ratio between the maximum plume upwelling velocity and the plate velocity, Peplume/Peplate. For fast plate velocities and sluggish plumes (low Peplume/Peplate), plate motion drags most plume material and downstream flow is dominant. As Peplume/Peplate increases, an increasing part of the plume material flows upstream. SSC systematically develops in the plume-fed sublithospheric layer, downstream from the plume. Onset time of SSC decreases with the Rayleigh number. For vigorous plumes, it does not depend on plate velocity. For more sluggish plumes, however, variations in the plume spreading behaviour at the base of the lithosphere result in a decrease in the onset time of SSCs with increasing plate velocity. In any case, SSC results in uplift of the isotherm 1573 K by up to 20 km relative to its initial equilibrium depth at the impact point.
ISSN: 0956-540X

hal-00856763
https://hal.archives-ouvertes.fr/hal-00856763
DOI : 10.1093/gji/ggt128

Éditeur(s) : HAL CCSD
Résumé : Ctenophores are one of the four animal phyla positioned outside from the Bilateria. Most ctenophore species are planktonic and gelatinous, and are easily recognisable by their eight comb rows used for swimming. Ctenophore systematics remains nowadays poorly understood. Anatomical characters do not help much in placing them within the animal tree, and similarly the grounds for establishment of their internal phylogeny as well as delimitation of species are notoriously weak due to a paucity of informative morpho-anatomical characters. Until now, the use of molecular data has failed to improve significantly this situation. The aim of this PhD thesis was to bring a contribution to our understanding of ctenophore evolution at different taxonomic scales. At the metazoan level, the position of ctenophores was addressed using a phylogenomic approach. Taxonomic sampling was significantly improved through sequencing and assembly of transcriptomes of 22 non-bilaterian species (belonging to ctenophores, cnidarians and sponges). Two independent datasets were analysed, one consisting in an update of an existing supermatrix of 128 genes, the other one (4235 genes) having been entirely built de novo, thanks to a newly-devised semi-automated protocol intended to eliminate all major potential causes of artefacts (contaminations, paralogies, missing data). Results clearly contradict recent phylogenomic studies which claimed Ctenophora to be the most early-diverging animal lineage, our analyses instead supporting Porifera as the sister-group to other metazoans. The exact position of ctenophores remains however uncertain at this stage, different conditions of analyses yielding three contradictory hypotheses as open possibilities. At the intra-phyletic level, analyses of a ADNr 18S and ITS (internal transcribed spacers) dataset, together with study of duplicated genes and the results of phylogenomic analyses, allowed resolving most phylogenetic relationships between ctenophore orders and families, including the placement of the ctenophore tree root. Finally, at smaller taxonomic scale, in-depth comparison between two species of the genus Pleurobrachia using immunohistochemistry demonstrates the potential of these techniques for uncovering new structural “micro-anatomical” characters useful for diagnosis and identification of ctenophore species. It is our hope that this work will contribute to improving the systematics of a poorly known phylum of great importance for understanding early animal evolution.
Les cténophores représentent l’un des quatre embranchements animaux extérieurs aux Bilateria. La majoritédes espèces sont planctoniques et gélatineuses, et sont reconnaissables à leurs huit rangées de peignes dont lebattement permet la nage. Leur systématique est encore de nos jours mal comprise. L'anatomie descténophores offre peu de caractères aussi bien pour placer la lignée dans l’arbre des métazoaires, que pourétablir les relations de parenté au sein de l’embranchement et délimiter les espèces, et jusqu’à présent lesdonnées moléculaires n’ont pas permis de résoudre ces problèmes de manière satisfaisante. L’objectif de cetravail de thèse est de contribuer à améliorer notre compréhension de l'évolution des cténophores àdifférentes échelles taxonomiques. A l’échelle des métazoaires, la position phylogénétique des cténophores aété abordée par une approche phylogénomique. Un effort significatif a été réalisé pour améliorerl’échantillonnage taxonomique à travers le séquençage et l’assemblage des transcriptomes de 22 espèces denon-Bilateria (cténophores, cnidaires, spongiaires). Deux jeux de données indépendants ont été analysés, lepremier représentant une mise à jour d’une supermatrice existante de 128 gènes ; le second (4235 gènes)ayant été entièrement construit de novo via un protocole original comportant la mise au point de nouvellesméthodes pour traiter de manière semi-automatisée les principales sources potentielles d’artéfact(contaminations, paralogies, données manquantes). Les résultats contredisent certaines études récentes enmontrant que les spongiaires et non les cténophores représentent le groupe-frère des autres métazoaires. Laposition exacte de ces derniers reste à ce stade incertaine (trois options se présentant suivant les analyses). Al’échelle intra-phylétique, l'analyse d'un jeu de données comprenant les marqueurs ADNr 18S et InternalTranscribed Spacers (ITS), associée à des analyses de gènes dupliqués chez les cténophores et aux analysesphylogénomiques précédentes, a permis de résoudre une grande partie des relations phylogénétiques entre lesordres et les familles de cténophores, tout en permettant de préciser la position de la racine. Enfin, à uneéchelle taxonomique plus fine, une comparaison approfondie entre deux espèces du genre Pleurobrachia aumoyen de marquages immunohistochimiques montre le potentiel de ces techniques comme source denouveaux caractères structuraux « micro-anatomiques » à valeur diagnostique pour la délimitation etl’identification des espèces de cténophores. En conclusion, ce travail se veut une contribution au progrès dela systématique d’un embranchement encore méconnu et d’une grande importance pour la compréhensiondes évènements anciens de l’évolution animale.
https://tel.archives-ouvertes.fr/tel-01165014

NNT : 2014PA066448
tel-01165014
https://tel.archives-ouvertes.fr/tel-01165014
https://tel.archives-ouvertes.fr/tel-01165014/document
https://tel.archives-ouvertes.fr/tel-01165014/file/these_archivage_3158995o.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
In this paper we investigate finite-frequency effects in crustal tomography. We developed an inversion procedure based on an exact numerical computation of the sensitivity kernels. In this approach we compute the 3D travel-time sensitivity kernels by using (1) graph theory and an additional bending to estimate accurately both rays and travel-times between source/receiver and diffraction points and (2) paraxial ray theory to estimate the amplitude along theses rays. We invert both the velocity and the hypocentre parameters, using these so-called banana-doughnut kernels and the LSQR iterative solver. We compare the ray-theoretical and the finite-frequency tomography to image the intermediate structures beneath the Gulf of Corinth (Greece), which has long been recognized as the most active continental rifting zone in the Mediterranean region. Our dataset consists of 451 local events with 9233 P- firstarrival times recorded in the western part of the Gulf (Aigion area) in the framework of the 3F-Corinth European project. Previous tomographic images showed a complex velocity crustal model and a low-dip surface that may accommodate the deformation. Accurate velocity models will help to better constrain the rifting process, which is still a subject of debate. The main results of this study show that finite-frequency tomography improves crustal tomographic images by providing better resolved images of the 3D complicated velocity structure. Because the kernels spread the information over a volume, finite-frequency tomography results in a sharpening of layer boundaries as we observed for the shallower part of the crust (down to 5 km depth) beneath the Gulf of Corinth.
ISSN: 0016-8025

insu-00354702
https://hal-insu.archives-ouvertes.fr/insu-00354702
DOI : 10.1111/j.1365-2478.2007.00683.x

Éditeur(s) :  :
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Collectivité territoriale de Martinique. Bibliothèque Schoelcher
Permalien : http://www.manioc.org/patrimon/SCH13245
SCH13245

Éditeur(s) : London : J. Johnson, St. Paul's Church Yard & J. Edwards
Siècle(s) traité(s) : 18
Droits : Domaine public
Provenance : Collectivité territoriale de Martinique. Bibliothèque Schoelcher
Permalien : http://www.manioc.org/patrimon/SCH13242
SCH13242

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : Paris : Firmin Didot Frères

Droits : Domaine public
Provenance : Archives territoriales de Guyane
Permalien : http://www.manioc.org/patrimon/GAD12001
GAD12001

Éditeur(s) : Edinburgh, London
Siècle(s) traité(s) : 19
Provenance : Université Caen Normandie. Service commun de la documentation
Permalien : http://www.manioc.org/patrimon/CAE19033_3
CAE19033_3

Éditeur(s) : Edinburgh, London
Siècle(s) traité(s) : 19
Provenance : Université Caen Normandie. Service commun de la documentation
Permalien : http://www.manioc.org/patrimon/CAE19033_4
CAE19033_4

Éditeur(s) : Paris : Firmin Didot Frères

Droits : Domaine public
Provenance : Archives territoriales de Guyane
Permalien : http://www.manioc.org/patrimon/GAD12002
GAD12002